Replacement Parts; Troubleshooting; After Sales Service; Electrical Safety - Breville VTT714 Instructions Manual

REPLACEMENT PARTS

For additional or replacement parts, please
visit www.breville.co.uk or call us on 0161
621 6900.

TROUBLESHOOTING

For troubleshooting and FAQs visit:
www.breville.co.uk/faqs

AFTER SALES SERVICE

These appliances are built to the very
highest of standards. There are no user
serviceable parts. Follow these steps if the
unit fails to operate:
• Check the instructions have been
followed correctly.
• Check that the fuse has not blown.
• Check that the mains supply is
functional.
If the appliance will still not operate, return
the appliance to the place it was purchased
for a replacement. To return the appliance
to the Customer Service Department,
follow the steps below:
1. Pack it carefully (preferably in the
original carton). Ensure the unit is
clean.
2. Enclose your name and address and
quote the model number (located on
the rating label) on all correspondence.
3. Give the reason why you're returning it.
4. If within the guarantee period, state
when and where it was purchased
and include proof of purchase (e.g. till
receipt).
5. Send it to our Customer Service
Department at the address below:
Customer Service Department
Jarden Consumer Solutions (Europe) Limited
Middleton Road, Royton, Oldham OL2 5LN, UK.
Telephone: 0800 525 089 Fax: 0161 626 0391
e-mail: enquiriesEurope@jardencs.com
6
TURN ON YOUR CREATIVITY™
Let the Breville team help you turn on your
®
creativity with a gateway to a world of food
and drinks without limits. You don't have to
travel far—just to your computer, tablet or
mobile—where you will discover our FREE
website with top tips and recipes to inspire
your imagination. Join us now at:
www.turnonyourcreativity.com

ELECTRICAL SAFETY

This appliance must be earthed.
If the plug is not suitable for the socket
outlets in your home, it can be removed
and replaced by a plug of the correct type.
NOTE: If the terminals in the plug are not
marked or if you are unsure or in doubt
about the installation of the plug please
contact a qualified electrician.
If a 13A 3-pin plug is fitted, it must be
an ASTA approved plug, conforming to
BS1363 standard. Replacement fuses must
be ASTA BS1362 approved.
The wires of the mains lead are coloured in
accordance with the following code:
GREEN/YELLOW
BROWN
BLUE
The wire which is coloured GREEN/
YELLOW must be connected to the
terminal in your plug which is marked with
an E or by the earth symbol ( ) or coloured
GREEN or GREEN /YELLOW.
The wire which is coloured BLUE must
be connected to the terminal in your
plug which is marked with the letter N or
coloured BLACK.
The wire which is coloured BROWN must
be connected to the terminal in your
plug which is marked with the letter L or
coloured RED.
™
- EARTH
- LIVE
- NEUTRAL