After Sales Service; Electrical Safety; Replacement Parts; Troubleshooting - Breville vtt571 Instructions Manual

AFTER SALES SERVICE

These appliances are built to the very
highest of standards. There are no user
serviceable parts. Follow these steps if the
unit fails to operate:
• Check the instructions have been
followed correctly.
• Check that the fuse has not blown.
• Check that the mains supply is
functional.
If the appliance will still not operate, return
the appliance to the place it was purchased
for a replacement. To return the appliance
to the Customer Service Department,
follow the steps below:
1. Pack it carefully (preferably in the
original carton). Ensure the unit is
clean.
2. Enclose your name and address and
quote the model number (located on
the rating label) on all correspondence.
3. Give the reason why you're returning it.
4. If within the guarantee period, state
when and where it was purchased
and include proof of purchase (e.g. till
receipt).
5. Send it to our Customer Service
Department at the address below:
Customer Service Department
Jarden Consumer Solutions (Europe) Limited
Middleton Road, Royton, Oldham
OL2 5LN, UK.
Telephone: 0161 621 6900 Fax: 0161 626 0391
e-mail: enquiriesEurope@jardencs.com

REPLACEMENT PARTS

For additional or replacement parts, please
visit www.breville.co.uk or call us on 0161
621 6900.

TROUBLESHOOTING

For troubleshooting and FAQs visit:
www.breville.co.uk/faqs
6
TURN ON YOUR CREATIVITY™
Let the Breville team help you turn on your
®
creativity with a gateway to a world of food
and drinks without limits. You don't have to
travel far—just to your computer, tablet or
mobile—where you will discover our FREE
website with top tips and recipes to inspire
your imagination. Join us now at:
www.turnonyourcreativity.com

ELECTRICAL SAFETY

This appliance must be earthed.
If the plug is not suitable for the socket
outlets in your home, it can be removed
and replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be
changed, the fuse cover must be refitted.
The appliance must not be used without
the fuse cover fitted.
If the plug is unsuitable, it should be
dismantled and removed from the supply
cord and an appropriate plug fitted as
detailed. If you remove the plug it must not
be connected to a 13 amp socket and the
plug must be disposed of immediately.
If the terminals in the plug are not marked
or if you are unsure about the installation
of the plug please contact a qualified
electrician.
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Green/Yellow
(Earth)
Blue
(Neutral)
Ensure that the outer sheath of
the cable is firmly held by the cord grip
™
13A
Fuse
Brown
(Live)