Vivitar DVR 859HD User Manual page 6

INSTALLING THE SD MEMORY CARD
IMPORTANT: You must use only a Class 4 SDHC Memory card or higher.
Make sure a Class 4 (or higher) SD card (up to 32GB) has been properly inserted into your camera.
SD card not included.
To properly insert the SD Card:
1) Slide open the battery/memory card compartment door.
2) Push the SD card into the slot in the direction as shown by the SD card icon on the camera.
See images below: 1 and 2.
3) Push the SD card until you hear a slight clicking sound. This indicates the SD card has been
inserted correctly. See images below: 3 and 4.
4) Close the door and slide back into place to securely close the battery/memory card compartment.
Note:
 After the camera is powered on, the SD icon will appear on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.
5