Versions with manual fuel pump
Press the fuel pump bulb at least
N
five times – even if the bulb is
already filled with fuel.
MS 250
Versions with decompression valve
Press in the button to open the
N
decompression valve.
The decompression valve closes as
soon as the engine fires.
For this reason you must press in
N
the button before each starting
attempt.
All models
0
1
3
Push the hand guard (1) forward –
N
the chain is locked.
Press down trigger lockout (2) and
N
pull the throttle trigger at the same
time. Set Master Control lever (3) to:
Choke closed (l)
If the engine is cold (also use this
–
position if the engine stopped when
you opened the throttle after
starting)
Starting throttle position (n)
If the engine is warm, i.e. if it has
–
been running for about one minute.
Hold and start your saw as
N
described.
English
2
31