Radio Indications Of Lost Bluetooth Connection; Standard Pairing Feature - Motorola APX 7000 User Manual

Radio Indications of Lost Bluetooth Connection

The radio shows
connection. Below is the scenario and radio
indications when the connection is interrupted.
The starts blinking for up to 10 seconds. You hear
a decremental-pitched tone. The display shows
<Device Type> alternating with CON LOST.
If the Bluetooth device successfully re-connects
before the Bluetooth Drop Timer expires, the display
shows momentary <Device Type> CONNCTED, and
shows persistently, or if the Bluetooth device fails
to re-connect within 10 seconds, the blinking
replaced by a persistent

Standard Pairing Feature

Note: Bluetooth tones, Bluetooth menu and
preprogrammed buttons must be preprogrammed by
a qualified radio technician. Check with your dealer or
system administrator for more information.
Once a COTS headset is paired to your radio, it is
always connected. Therefore the battery life of the
when the device has a Bluetooth
.
accessory is aligned with the Talk time power
consumption, not the Standby time consumption.
The Bluetooth Standard Pairing feature enables your
Bluetooth enabled radio to search for other Bluetooth
enabled and discoverable device. Once the device is
discovered, your radio automatically pairs with the
device.
This feature also enables your Bluetooth enabled
radio to be visible to another Bluetooth enabled
device and receive request to pair from other device.
Searching and Pairing the Bluetooth Device
Ensure the Bluetooth on your device is turned to On
and is set to Discoverable in order to enable your
radio to detect your device in Bluetooth.
is
Bluetooth Search in Bluetooth Standard Pairing
method is used to scan for other Bluetooth devices
nearby. It is set to off by default.
The radio only search for HSP devices and Motorola
MCW & OCW accessories. Radio will filter out other
profiles.
Press the preprogrammed Bluetooth Inquiry
On/Off button, to enable the Bluetooth Search
feature.
73
English