Table of Contents
Advertisement
TRENDnet User's Guide
o
Destination Layer 4 Port - Indicates the destination layer 4 port
ranging from 1 - 65535.
o
Policy Sequence: Enter a number in the Policy Sequence field. The
Policy Sequence must be a unique number within the range of 1 -
65535. This field is mandatory.
o
Policy Action: In the Permit/Deny field, use the pull down menu to
select one of the following parameters:
o
Deny - This selection drops ingress packets that conform to the
specified Replaced-CoS or Replaced-DSCP.
o
Permit - This selection allows ingress packets that conform to the
specified Replaced-CoS or Replaced-DSCP to be processed by the
switch.
Note: You must enter a selection for Deny/Permit field even if the
Profile Action ID that you have entered ignores both the Replaced-
DSCP and Replaced-CoS fields.
o
Replaced-CoS: Enter a number in the Replaced-CoS field ranging from
0 to 7. This field indicates the CoS level of interest. This field is not
mandatory and you may elect to leave it blank
o
Replaced-DSCP: Enter a number in the Replaced-DSCP field within the
range of 0 to 63. This field indicates the DSCP level of interest. This
field is not mandatory and you may elect to leave it blank.
o
Rate Control Index: The Rate Control Index is a unique number within
the range of 1 - 65535. This field is mandatory and must match a Port
List Index that has been previously entered on the Policy Index.
o
Port List: Select the interface for which you want to display data.
Click Add to add the policy to the Policy Table.
© Copyright 2016 TRENDnet. All Rights Reserved.
TEG-40128
76
Advertisement
Table of Contents
