Detaching And Refitting The Laser Scanner Unit (Lsu) - Kyocera KM-2810 Service Manual

(3) Detaching and refitting the laser scanner unit (LSU)

Procedure
1. Remove the scanner unit (See page 1-5-
14).
2. Remove the screw and then remove the
grounding terminal.
3. Remove two connectors from the control
PWB.
Control PWB
Connector
YC10
Control PWB
Connector
(YC10)
Connector
Connector
(YC3)
Figure 1-5-21
2H9
YC3
Grounding
terminal
Screw
1-5-17