Pptp - D-Link DWR-953 User Manual

Section 3 - Configuration
Address Mode: If your ISP provided a static IP address, select Static IP, otherwise
leave this setting at the default, Dynamic IP.
PPTP IP Address: Enter the IP address provided by your ISP (Static IP only).
PPTP Subnet Enter the subnet mask provided by your ISP (Static IP only).
Mask:
PPTP Gateway IP Enter the gateway address provided by your ISP (Static IP only).
Address:
PPTP Server IP Enter the server IP address provided by your ISP (Static IP only).
Address:
Username: Enter the PPTP username provided by your ISP.
Password: Enter the PPTP password provided by your ISP.
Verify Password: Re-enter the PPTP password for verification.
Select Always on if you would like the router to never disconnect,
Reconnect
or Connect-on-demand to allow the router to establish a
Mode:
connection to the Internet only when a device on your network
tries to access a resource on the Internet.
Maximum Idle Enter a maximum idle time during which the Internet connection
is maintained during inactivity (if you selected Always on above,
Time:
this setting will have no effect).
NAT disable: Click the checkbox to disable Network Address Translation(NAT).
D-Link DWR-953 User Manual

PPTP

13