Outbound Filter - D-Link DWR-953 User Manual

Section 3 - Configuration
The Outbound Filter enables you to control what packets are allowed to pass through the router. The outbound filter applies to all outbound
packets.

Outbound Filter:

Check this box to enable the filter.
Use schedule You may select Always On or choose the number of a schedule
rule: rule that you have defined. Click Copy to to copy the rule to the
specified ID.
Outbound Filter Select whether to Allow or Deny all data to pass except those
rules list: matching the rules configured on this page.
ID: Identifies the filter.
Source IP : Ports: Specify the local IP address and then specify the port after the
colon.
Destination IP : Specify the remote IP address and then the port after the colon.
Ports:
Enable: Select this box to enable the filter.
Schedule Rule #: Specify the schedule rule number or click Add New Rule... to add
a new schedule rule.
D-Link DWR-953 User Manual
Outbound Filter
41