Page 1
Model: iKN105 dual charging stereo alarm clock with speakerphone and removable battery CHARGE K-CELL BEFORE instruction manual Questions? Contact Customer Service at 1-800-288-2792...
Page 2
Introduction Thank you for purchasing the iHome K2. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, tablet or other Bluetooth audio device and mobile charging on the go with the included removable K-Cell rechargeable battery.
Page 3
GENERAL BATTERY PRECAUTIONS • Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. • Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance.
Table of Contents Included ............................4 Meet Your K2 ..........................5 Display............................6 Setting Up the Unit..........................6 Charging Charging the K-Cell via AC Adaptor/Battery Level Meter..............7 Charging the K-Cell via USB......................8 Charging Devices Using the K-Cell/Charging Devices Using the USB Charging Port........9 Setting The Clock ...........................10 Setting and Using the Alarms .......................
The Display Time Display PM/AM Indicators Low Backup Battery Indicator Sleep Mode Indicator Mode/Wake to Alarm Active Indicator Alarm Source Indicators: Radio Mode Indicator Bluetooth device, Bluetooth Indicator Radio frequency, Tone Setting Up the Unit • Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet to power the unit and charge K-Cell.
Charge inserted K-Cell fully before use. For first time use, charge for at least 3 hours. Use iHome K-Cell battery ONLY. Do NOT attempt to use with/insert other USB battery cells. To insert K-Cell: Make sure the iHome name and the arrow on the...
Using the Charging the K-Cell via USB Charge K-Cell fully before use. For first time charge, charge for at least 3 hours. Connect the included micro USB cable to the micro USB Charging Port on the top of the K-Cell and connect the other standard USB plug to a computer, USB AC adaptor (not included) or other USB power source.
Using the Charging Devices Using the K-Cell Charge K-Cell fully before use. For first time charge, charge for at least 3 hours. Connect the USB cable plug included with your device to the standard Charging Port on the top of the K-Cell and connect the other end to the device you wish to charge.
Using the Setting the Clock 1. Press and hold the Time Set Button located on the back of the unit for 2 seconds until the clock display flashes and a beep sounds. 2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting).
Using the Setting and Using the Alarm (Continued) 4. Press the – or + Buttons to select the desired wake to alarm source: Bluetooth, radio or tone. The selected wake-up source will flash in the lower part of the display. Wake to Bluetooth: You will wake to the currently linked Bluetooth device.
Using the Using the FM Radio 1. Press and release the Mode Button as needed until the FM indicator icon and current FM radio frequency appear on the display. 2. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next clear station).
Using the Using FM Radio in Other Countries Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to USA frequency steps. To use the radio outside the USA: 1. Make sure unit is OFF. 2.
Bluetooth icon will flash quickly while the unit attempts to pair. 4. “iHome Kineta K2” should appear on your device’s menu. If your device asks if you wish to pair, accept (select “Yes” or similar). Once paired with a device, the Bluetooth button will glow solid, confirmation tones will sound and your music will play through the unit.
Bluetooth Button will flash quickly, indicating the unit is in pairing mode. 4. “iHome Kineta K2” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome Kineta K2” to connect it. If prompted for a passcode, enter “1234” on your device’s keypad.
Using the Pairing with a Different Device When you power ON the unit, it will automatically link with the most recently connected Bluetooth device as long as that device is still within range (approx. 30 feet). If no device is found within 3 minutes, the unit will power down.
Using the Speakerphone Operation NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. Button will flash green. When a call is received, playing music is muted to hear the ring tone. The 1.
Using the Playing Audio via Aux In 1. Connect one end of the included 3.5mm stereo audio cable to the Aux-in jack on the back of the unit and connect the other end to the headphone or line-out jack on your audio device. 2.
Using the Replacing and Installing Clock Backup Battery Note: 1 CR2450 battery is included with the unit. Remove pull tab before using the unit. This model is equipped with a battery backup circuit that will maintain the time and other settings in the event of a temporary power interruption (the display is NOT maintained).
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free...
FCC/IC Information FCC ID: EMOIKN105 IC ID: 986B-IKN105 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Bluetooth device if the device is still within range (approx.30 feet). To pair with a different device you must turn off Bluetooth capability on the already paired device, or take it out of range. For further information and to see the latest instructions, visit www.ihome.com/support...
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.