Table of Contents
Advertisement
Chapter 12
8 ) Enter the
Pre-Shared Key
keep
Perfect Forward Secrecy
Note:
The key should consist of visible characters without blank space.
Make sure Site A and Site B use the same key.
9 ) Leave the
Advanced
OK
to save.
3 Configuration on Site B (remote network). Refer to step 2
configuration on Site A and make sure that Site A and Site B
use the same
pre-shared keys
settings.
4 The
Status
column will change to
has been set up successfully.
5 Check the VPN connection. You can ping site B' LAN IP
from your computer in site A to verify that the IPSec VPN
connection is set up correctly.
Tips: To check the VPN connection, you can do the following.
On the host in Site A, press
and hit
OK.
In the CLI window, type in "ping 192.168.2.x" ("192.168.2.x"
can be IP address of any host in Site B). Then press [Enter].
Specify Your Network Settings
for IKE authentication. Then
enabled.
Settings as default value. Then click
and
Perfect Forward Secrecy
UP
if the VPN connection
[Windows Logo]
+
[R]
to open Run dialog. Input "cmd"
82
Advertisement
Table of Contents
