Table of Contents
Advertisement
2
Visit http://tplinkmodem.net, and log in with password you set for the modem
router.
3
Go to
Advanced
4
Select
the Wireless Router Mode
Note: IPTV function is not supported in
T7 How to use the WDS Bridging function to extend my wireless
network?
My house covers a large area. The wireless network coverage of the router I'm using
(the root router) is limited. I want to use an extended router to extend the wireless
network of the primary router. Follow the steps to configure the modem router.
1
Visit http://tplinkmodem.net, and log in with password you set for the modem
router.
2
Configure the
LAN IP address
router. For example, the IP address of the root router is 192.168.1.1, the IP address
of the extended router should be from 192.168.1.2 to 192.168.1.254.).
3
Go to
Advanced
network (2.4GHz or 5GHz). Locate the
enable the
WDS Bridging
4
Click
Survey
to scan all the AP devices and choose the root AP to be bridged.
>
Operation Mode
page.
option and click
Wireless Router
of the modem router in the same subnet as the root
>
Wireless
>
Advanced Settings
function.
Save
to make the settings effective.
Mode.
page and select the wireless
WDS
section and select the checkbox to
103
Advertisement
Table of Contents
