Stihl MS 260 Instruction Manual page 28

English
Turn filler cap (approx. 1/4 turn)
N
Markings on filler cap and fuel tank must
align
Remove the filler cap
N
Filling with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends using the STIHL
filling system for fuel (special
accessory).
Fill with fuel
N
26
Closing
Bracket is in an upright position:
Position filler cap – markings on filler
N
cap and fuel tank must align
Push the filler cap down as far as it
N
will go
Hold the filler cap down and turn it
N
clockwise until it engages
Then the markings on filler cap and fuel
tank will align
Close bracket lock
N
Filler cap is locked
If the filler cap will not lock onto the fuel
tank
The base of the filler cap is twisted in
relation to the upper part.
Remove the filler cap from the fuel
N
tank and look at it from above
MS 260, MS 260 C