Power Saving - LG LX54 SERIES Installation Manual

40
PRO:CENTRIC / POWER SAVING
6 RF Type
y Sets the RF modulation type to DVB-T or DVB-C. The default value is DVB-T.
y
7 RF Freq.(kHz)
y Sets the RF frequency at which the Pro:Centric data is received.
y
y Frequency tolerance : start frequency~end frequency for each country
y
y If the RF Type is DVB-T, it can be changed in the range of 47000~890000.
y
y If the RF Type is DVB-C, it can be changed in the range of 46000~862000.
y
8 P:C IP Setting
y It can be set using the < > button or number buttons.
y
- (IP a) : Sets the first number in the IPv4 address.
- (IP b) : Sets the second number in the IPv4 address.
- (IP c) : Sets the third number in the IPv4 address.
- (IP d) : Sets the fourth number in the IPv4 address.
- (Port) : Sets the actual port number where the Pro:Centric server is running. It can be set using
the < > or number buttons.
y The default value of IP a/b/c/d is 0 and the range is between 0 and 255. The default value of Port is
y
80 and the range is between 0 and 65535.
9 Navetive EPG
- Set to Enable or Diable.
- When set to Enable, Native EPG feature can be used.
- When set to Disable, Native EPG feature cannot be used.
- The feature is set to Disable as default.

POWER SAVING

(* Only for LX5**H series)
y Image shown may differ from your TV.
y
Installation Menu (V 3.0)
▲
Password Change
Set ID Setup
Configuration Setup
Multi Timer
Lock Mode
External Speaker
HCEC Setup
No Signal Image
Network Setup
Pro:Centric
Power Saving
S/W : 00.02.00.01 Micom : 0.00.32
1 Press the button to select the Power Saving.
Power Saving
Static Saving
Keyless Off Hours
Previous
OK
100(OFF)
◄ ►
OFF
OK