Fujitsu B24W-7 Operating Manual page 28

Operation
Adjusting the brightness
► Press the button to open the Brightness setting window.
► Press the button or the
► Press the button to close the menu.
Performing auto-adjustment of the monitor
This function is only intended for analogue image transmission (VGA).
► Press the AUTO

The Auto Processing message appears.
Picture quality and position are set to optimum values for your system.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press the
MENU
monitor on using the ON/OFF button or the ON/OFF touch sensor.

The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Locking the ON/OFF button or ON/OFF touch sensor
The ON/OFF button or ON/OFF touch sensor can be locked to prevent accidental
or unauthorised changes to the screen settings.
► Press the
ECO

The message Power button locked / unlocked is displayed.
In order to unlock the ON/OFF button or ON/OFF touch sensor, do the same again.
24
button to set the desired brightness.
button for about 1 second.
button and keep it pressed for a few seconds while you switch the
button and button at the same time for a few seconds.
INPUT
Fujitsu