Fujitsu B24W-7 Operating Manual page 21

Connecting cables to the monitor
The data cables supplied have two 15-pin D-SUB connectors or two 24-pin DVI
connectors for connection to the monitor and to the computer.
Information on the computer connections and interfaces is contained in the
operating manual for the computer.
2
1 = Security slot for "Security Lock"
2 = Power connector
3 = DisplayPort socket
4 = DVI-D socket (DVI)
5 = D-SUB socket (VGA)
► Select the appropriate data cable for your computer.
► Connect one of the connectors of the data cable to the DVI-D or DisplayPort socket of the
monitor and secure the DVI-D plug-in connection by tightening the safety screws.
The monitor automatically detects the input (VGA, DVI, DisplayPort)
when only one signal source is connected.
► Insert one connector of the audio line into the AUDIO IN socket (6) on the
monitor and make sure it is properly engaged.
► Plug the power cable supplied into the power connector of the monitor.
Fujitsu
1
3 4 5 6 7
6 = AUDIO-IN socket
7 = AUDIO-OUT socket
8 = USB 2.0 (upstream)
9 = USB 2.0 (downstream)
Getting started
8 9
17