Elation CUEPIX BLINDER WW4 User Manual page 18

MENU OPTIONS / VALUES
DMX MODE
ADDR:001 - 512
ADDR:xxx
CH:01, 02, 04, 05, 07, 09
CH:xx
SLAVE
M O D E
AUTO RUN
FQN:01-99
FQN:xx
01. STATIC
-
01-09
09.FLOW4
Standard, Stage, TV, Architectural,
Dim Curve
Theatre
Pixel Flip
STANDARD, FLIP 1, FLIP 2, FLIP 3, FLIP 4
NO DMX MODE
Hold, Blackout, Program
Ethernet Set
Service PIN
Fixture ID Password=050
Fixture ID
000.000.000.000
Device IP Addr
Fixture ID
000.000.000.000
Ctrl Addr
Fixture ID
000-255
Universe
Ethernet Set
Kling-Net, ArtNet
Protocol Set
Ethernet Set
ON, OFF
Network Switch
ELATION© CUEPIX BLINDER WW4™
S Y S T E M M E N U
Specifications are subject to change without any prior written notice.
w w w . e l a t i o n l i g h t i n g . c o m
Set DMX Address.
Set DMX Channel Mode.
Set unit to Slave Mode.
Set the number of times each internal macro will
repeat before moving to the next macro.
Select Internal Program Macro.
See INTERNAL MACRO MENU.
Set desired Dimming Curve.
Set starting Pixel (COB module).
See Pixel Flip Section.
Define how fixture reacts when NO DMX signal present.
Enter Service Password to access Ethernet Menus.
Set IP address.
(Need to enter Service PIN to access this menu)
Set Subnet Mask.
(Need to enter Service PIN to access this menu)
Set DMX Universe number.
(Need to enter Service PIN to access this menu)
Set Protocol.
Set Network switch.
18
CUEPIX BLINDER WW4™ User Manual Ver. 1
DESCRIPTION