Panasonic Viera TC-P42X3L Operating Instructions Manual page 7

Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
•
Otherwise the TV or the display may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
•
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will
not be strong enough to support the TV, and it might fall over and become damaged, and personal
injury may result.
Ensure that the TV does not fall over.
•
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and
personal injury may result.
Two or more people are required to install and remove the TV.
•
If two or more people are not present, the TV may be dropped, and personal injury may result.
Assembly screw (4)
(Silver)
•
M5 × 18 (mm)
Base
•
TBLX0134 (TC-P42X3L)
•
TBLX0135 (TC-P50X3L)
Assembling the pedestal
Use the assembly screws
the pole to the base securely.
•
Make sure that the screws are securely
tightened.
•
Forcing the assembly screws the
wrong way will strip the threads.
A
Pole
R
Base
(Image: TC-P50X3)
Assembly screw (4)
(Black)
•
M5 × 30 (mm)
Securing the TV
to fasten Insert the pole into the TV, and then fasten securely with
the assembly screws
•
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
•
Carry out the work on a horizontal and level surface.
B
Pole
L
Front
D
(Image: TC-P50X3)
Pole
•
R: TBLA3685 (TC-P42X3L)
TBLA3679 (TC-P50X3L)
•
L: TBLA3686 (TC-P42X3L)
TBLA3680 (TC-P50X3L)
L
R
.
Hole for
pedestal
installation
Base
7