Table of Contents
Advertisement
PCM Optical Level
• -12 / -10 / -8 /
-6 / -4 / -2 / 0 (dB)
HDMI1 / 2 Input
• Digital
• Analogue
Reset to Defaults
Picture
Sound
Setup
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
• H & V
• On Green
Reset to Defaults
Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 /
90 minutes
Eco Navigation
Child Lock
26
Adjusts the audio level of PCM output from DIGITAL AUDIO OUT
terminal as the initial setting
•
Normally, PCM sound is larger comparing with the other types of audio
track.
•
Digital TV mode only
Selects to fit the input signal (p. 63)
[Digital]: HDMI cable connection
[Analogue]: HDMI-DVI adaptor cable connection
•
HDMI input mode only
Press the OK button to reset settings of the present Mode, Balance,
Headphone Volume and Surround in the Sound Menu to the default.
Main Menu
Item
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•
Options change depending on signals
Sets to the minimum level if noise occurs.
Eliminates flicker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
PC sync signal type
[H & V]: by the horizontal and vertical signals from your PC
[On Green]: Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default.
Sets the time until the TV automatically goes into Standby mode
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save]
[Intelligent Auto Standby]
[Auto Standby]
Locks a channel / AV input to prevent access to it (p. 33)
Adjustments / Configurations (alternatives)
[On]
[On (No reminder)]
[2 hours]
Adjusts horizontal position
Adjusts vertical position
Hide quick links:
Advertisement
Table of Contents
