Sharp R-15AT Original Instruction page 17

COUNTER CHECK
Set the counters to "0" before using your new oven (see COUNTER CLEAR below) to keep a record of the oven use.
Example: If you want to know the total amount of times the oven has been used, and the number of times each
programme has been used. In the following example, the total time was 8268 and memory 1 was 513.
Step Procedure
1
Press the CHECK key twice.
2
To check memory 1 usage,
press the NUMBER key
Note: 1. To cancel Counter Check mode, press the CHECK key
Each counter can count the times up to 9999, and it will return to 0 if it is over 9999.
2. To check the times of manual cooking, press the SELECT TIME key
To check the times of EXPRESS DEFROST cooking, press the EXPRESS DEFROST key
Step 2 instead of the NUMBER key.
COUNTER CLEAR
Each number of times can be cleared.
Example: Suppose you want to clear the times of memory 1.
Step Procedure
1
Press the CHECK key twice.
2
Press the NUMBER key
3
Press the SET key.
Note: 1. To cancel Counter clear mode, press the CHECK key
2. To clear the times of manual cooking, press the SELECT TIME key
To clear the times of EXPRESS DEFROST cooking, press the EXPRESS DEFROST key
at Step 2 instead of the NUMBER key.
3. To clear total using times, skip Step 2.
Key Order
.
Key Order
.
13
Display
X 2
CHECK will flash on and off.
(Total times used)
After about 1 sec.
(Times memory 1 was used)
.
at Step 2 instead of the NUMBER key.
Display
X 2
CHECK will flash on and off.
(Total times used)
After about 1 sec.
(Times memory 1 was used)
.
at Step 2 instead of the NUMBER key.
CHECK
NO. CHECK
CHECK
at
CHECK
NO. CHECK
CHECK
CHECK