Sharp R-15AT Original Instruction page 11

To programme time and power level into a memory
Example: If you want to set 4 minutes on 60% for the 1st sequence and 2 minutes on 30% for the 2nd sequence
for 1 serving in memory 1.
Step
1
Press the SET key twice within 2 sec-
onds.
2 Press the NUMBER key
3
Press the SELECT TIME key.
4
Enter desired cooking time for the 1st
sequence. (4 minutes)
5
Press the SELECT POWER key.
6
Enter desired power level for the 1st
sequence. (60%)
7
Press the SELECT TIME key.
8
Enter desired cooking time for the 2nd
sequence. (2 minutes)
9
Press the SELECT POWER key.
10
Enter desired power level for the 2nd
sequence. (30%)
11
Press the SET key twice to complete
the setting.
P = Power
Note: 1. If the cooking time is over the max. time, the display will show "EE9". See page 14.
2. If your programmed time is over max. time at Double Quantity, you cannot use Double
Quantity for the memory. You can cook only 1 serving.
3. It is not necessary to press the SELECT POWER key
4. At step 1 the audible signal will only sound on the second press of the SET key
Procedure
.
Key Order
X 2
X 2
for 100%.
7
Display
NO.
NO. will flash on and off.
NO.
.