Headlight Bulb Replacement - Yamaha Fazer Owner's Manual

Colorprofile:GenericCMYKprinterprofile
CompositeDefaultscreen
PERIODIC MAINTENANCE AND MINOR REPAIR
1
1. Screw - 2 Nos. (LH & RH)
2. Bolt - 1 No.

Headlight bulb replacement

If the headlight bulb burns out,
replace the bulb as follows:
1. Remove the two screws
theHead Light Cowling "1"..
2. Loosen the Bolt "2" below the
Headlight Cowling.
3. Slide Headlight forward..
Chapt6_c.cdr
Saturday,October01,20051:05:29PM
2
1
1. Bulb holder - 2 Nos.
. Remove the defective bulb from
4
the bulb holder whichever is
fused.
from
6-28
4
1
1. Bulb 2 Nos. (LH & RH)
WARNING
Keep flammable products and
your hands away from the bulb
while it is on, as it is hot. Do not
touch the bulb until it cools down.
5. Put a new bulb into position and
secure it in place with the bulb
holder.
6. Install the Head Light Assy.
7. If the headlight beam adjustment
is necessary, ask a YAMAHA
dealer to make adjustment.