Connecting A Pc; Displaying A Pc Image On The Screen - Sharp LC-19A33X-BK Operation Manual

Connecting a PC

Use the PC terminals to connect a PC.
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 42 for a list of PC signals compatible with the TV.
Signal names for 15-pin mini D-sub connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11

Displaying a PC image on the screen

Ø 3.5 mm stereo
minijack cable
(commercially available)
RGB cable
(commercially available)
Pin No. Signal name
R
G
B
Not connected
CSYNC
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No. 5 is not used for inputting the signal.
AUDIO
(L/R)
ANALOG
RGB
PC
Pin No. Signal name
GND (Ground)
GND (Ground)
GND (Ground)
+5V
GND (Ground)
To view an image from a PC, select "INPUT4" using
PC or TV/VIDEO on the remote control unit or TV/
VIDEO on the TV.
TV
INPUT1
INPUT2
INPUT3
INPUT4
When connecting to a PC, the correct input signal type
is automatically detected. (See page 40.)
NOTE
• Each time TV/VIDEO is pressed, the input source toggles.
Pin No. Signal name
Not connected
SDA
HD
VD
SCL
37