Identifying Controls - Panasonic TH-37PX8EA Operating Instructions Manual

Accessories / Options
Rear of the TV
Attach the clamper
Insert the clamper
in a hole

Identifying Controls

TV
Mains power
On / Off switch
•
Switch On to turn on the TV
or turn the TV to standby
mode by the remote control
8
Using the clamper
To remove
from the TV:
hole
Keep
pushing both
side snaps
Function select
•
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 30)
Changes the
input mode
Increases or decreases the programme position by one. When a function is already displayed,
press to increase or decrease the selected function. When in Standby mode, switches TV On.
Recording LED
•
Standby for Direct TV Recording :orange
Remote control signal receiver
Power LED
•
Standby: red
On: green
•
When using the remote control, indicates the TV has received a command.
•
•
•
Bundle the cables
snaps
hooks
Headphones jack
(p. 42)
Do not bundle the RF cable and mains
lead together (could cause distorted
image).
Fix cables with clampers as necessary.
When using the optional accessory,
follow the option's assembly manual to
fi x cables.
To loosen:
Set the
knob
tip in the
hooks
Lift door to open
AV3
AV3 terminals
(p. 42)
Keep
pushing
the knob