Panasonic TH-37PX8EA Operating Instructions Manual page 24

How to Use Menu Functions
Menu list
Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Viewing Mode
Contrast, Brightness,
Colour, Sharpness
Tint
Colour Balance
Colour Management
P-NR
3D-COMB
Reset to Default
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to
Wall
MPX
HDMI1 Input
Reset to Default
24
Item
Controls the connected equipment with VIERA Link function, and enables various
convenient recording, playback, etc. (p. 39 - 41)
•
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.
Basic picture mode (Dynamic / Normal / Cinema)
Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright room
Normal : Recommended for viewing under normal ambient room lighting conditions
Cinema : For watching movies in a darkened room producing a cinema-like picture
•
Set for each input signal
Increases or decreases the levels of these options according to your personal preference
With an NTSC signal source connected to the TV, the picture hue can be adjusted to
suit your taste
•
For NTSC signal reception only
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
Automatically adjusts colours to vivid ones (Off / On)
Picture Noise Reduction
Automatically reduces unwanted picture noise and fl icker noise in the contoured parts of
a picture (Off / Min / Mid / Max)
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to "On" to display sharper and more accurate colours (Off / On)
•
For PAL or NTSC signal reception only
•
Not valid on RGB, S-Video, Component and HDMI
Press the OK button to reset the present Picture Mode to the default settings
Basic sound mode (Music / Speech)
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / On)
Provides a dynamic enhancer to simulate improved spatial effects
Adjusts volume of individual programme or input mode
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
•
If the back space between the TV and wall is over 30 cm, "Over 30cm" is recommended.
•
If the back space between the TV and wall is within 30 cm, "Up to 30cm" is recommended.
Select stereo / monaural (Mono / Stereo)
•
Normally: Stereo
•
Stereo signal cannot be received: Mono
•
M1 / M2: Available while mono signal is transmitted
•
Analogue mode only
Select to fi t the input signal (Auto / Digital / Analogue) (p. 44)
Auto
Digital
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only
•
HDMI2 terminal is for digital signal only
•
No setting for HDMI2 available
Press the OK button to reset the present Sound Mode to the default settings
Adjustments / Configurations (alternatives)
: Automatic detection of digital or analogue sound source
: HDMI cable connection