Accessories / Options
Rear of the TV
■
Attach the clamper
Insert the clamper
in a hole
Identifying Controls
TV
Mains power
On / Off switch
•
Switch On to turn on the TV
or turn the TV to standby
mode by the remote control
8
Using the clamper
To remove
from the TV:
hole
Keep
pushing both
side snaps
Function select
•
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 27)
Changes the
input mode
Increases or decreases the programme position by one. When a function is already displayed,
press to increase or decrease the selected function. When in Standby mode, switches TV On.
C.A.T.S. (Contrast Automatic Tracking System) sensor
•
Senses brightness to adjust picture quality in "Eco" mode in Picture Menu (p. 22)
Remote control signal receiver
Power LED
•
Standby: red
On: green
•
When using the remote control, indicates the TV has received a command.
•
•
•
■
Bundle the cables
snaps
hooks
Headphones jack
(p. 40)
Do not bundle the RF cable and mains
lead together (could cause distorted
image).
Fix cables with clampers as necessary.
When using the optional accessory,
follow the option's assembly manual to
fi x cables.
To loosen:
Set the
knob
tip in the
hooks
Lift door to open
AV3
AV3 terminals
SD Card slot
(p. 40)
(p. 33)
Keep
pushing
the knob