Playing Video And Audio Equipment; Basic Operation; Listening To Fm/Am Broadcasts - Denon AVR-1708 Owner's Manual

Turning Off the Sound Temporarily (Muting)
[MUTING]
Press .
To cancel, press [MUTING] again. Muting can also be canceled by
adjusting the master volume.
Listening with Headphones
<PHONES>
Plug the headphones into
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
Be careful not to set the volume too high when using headphones.
Switching the front speakers
<SPEAKER>
Press .
Video Select Function
Switch video input source while listening to audio signal.
[V. SELECT]
Press until the desired picture appears.
b
To cancel, press [V. SELECT] to select "SOURCE" .
NOTE
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
Checking the currently playing program source, etc.
[STATUS]
Press .
The current program source and various settings are indicated on
the display.
For details, refer to "Information" (vpage 33).
Switching the brightness of the display (Dimmer)
[DIMMER]
Press

Playing Video and Audio Equipment

.

Basic Operation

1
Prepare the equipment.
q Load the DVD, CD or other software in the player.
(vSee the operating instructions of the respective devices.)
w To play a video device, switch the monitor input.
(vSee the monitor's operating instructions.)
2
SOURCE SELECT
Use
3
[MODE SELECTOR 1]
Set
(vpage 42 "Remote Control Unit Operations")
4
[MODE SELECTOR 2]
Set
to operate.
5
Start playback.
(vSee the operating instructions of the respective devices.)
.
Bright Dim
OFF Dark
to select the input source.
to "AUDIO" or "VIDEO".
to the component you want

Listening to FM/AM Broadcasts

Basic Operation
1
<SOURCE SELECT>
Either turn or press
select "TUNER".
2
[MODE SELECTOR 1]
Set to "AUDIO".
(vpage 42 "Remote Control Unit Operations")
3
BAND
Press to select "FM" or "AM".
4
Tune in the desired broadcast station.
q To tune in automatically (Auto Tuning)
Press [MODE] to light the "AUTO" indicator on the display, then use
TUNING to select the station you want to hear.
w To tune in manually (Manual Tuning)
Press [MODE] to turn off the display's "AUTO" indicator, then use
TUNING to select the station you want to hear.
• It is also possible to switch to "FM" or "AM" in step 1 by pressing
[TUNER].
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold TUNING to change
frequencies continuously.
ENGLISH
[TUNER]
to