Subwoofer Mode Setup; K ~ A5 Distance - Denon AVR-1708 Owner's Manual

ENGLISH
Center Speaker
Select center speaker use and size.
[Selectable items] Large Small
Surround Speaker
Select surround speakers use and size.
[Selectable items] Large Small
Surround Back Speaker
Select surround back speaker use and size.
(
[Selectable items] Large Small
(
2spkrs 1spkr
Subwoofer
Select subwoofer use.
[Selectable items] Yes No
Large
: Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
: Select this when using small speakers without ample low
frequency reproduction capabilities.
None
: Select this when no speaker is connected.
Yes
: Select this when a subwoofer is connected.
No
: Select this when no subwoofer is connected.
2spkrs 1spkr
:
Select the number of surround back speakers.

Operations
(vpage 21)
• Select "Large" or "Small" not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
None
based on the frequency set at "Crossover Frequency" (vpage
23).
• When "Front Speaker" is set to "Small" , "Subwoofer" is automatically
set to "Yes" .
• If "Subwoofer" is set to "No" , "Front Speaker" is automatically set to
"Large" .
None
• If "Surround Speaker" is set to "None" , "Surround Back Speaker" are
automatically set to "None" .
• When using just one surround back speaker, connect it to the left
channel (SBL).
)
None
)
j Subwoofer Mode Setup
Select low range signal to be reproduced by subwoofer.
[Display]
[Selectable items]
LFE (Normal)
LFE+Main
• This can be set when "System Setup" – "Speaker Setup" –
"Subwoofer" is set to "Yes" .
• Play music or a movie source and select the mode offering the
strongest bass.
• Select "LFE+Main" if you want the bass signals to always be
produced from the subwoofer.
1 . S p 2 . I n 3 . O p
Q
S p e a k e r S e t u p
Q
7 S W M o d e N o r m
: Play low range and LFE signal of channels set to
"Small" .
: Play low range and LFE signal of all channels.

k ~ A5 Distance

Set distance from listening position to speakers.
Before making the settings, measure the distance from the
listening position to the different speakers.
[Display]
1 . S p 2 . I n 3 . O p
S p e a k e r S e t u p
8 F L 3 . 6 m
1 5 S W 3 . 6 m
Distance measurement
Select the speaker you want to set, then set the distance.
Set the value closest to the measured distance.
[Variable range]
0.0m ~ 18.0m
: Settable in units of 0.1 meters.
NOTE
Set the distance between the listening position and the various
speakers to no more than 6.0 meters.
Q
Q
Q