Pioneer DV-636D Operating Instructions Manual page 23

Setting analog audio connections
to an AV amplifier or receiver
The [Analog Jacks] screen establishes whether analog
connections have been made to an AV amplifier or
receiver, and if connections are made, whether the
connections made are for 2 channel stereo or for 5.1
channel surround sound.
Audio1 Audio2 Video
Setup Navigator
Amp Connection
Analog Jacks
2 CH jacks for L/R
Move
ENTER
Settings: 2 Channel*
Select if you have made 2 channel
connections to an amplifier or receiver.
5.1 Channel
Select if you have made 5.1 channel
connections to an AV amplifier or receiver
with the appropriate inputs. When this
setting is selected, several screens will
follow to determine the configuration of your
speaker system. These screens are
described in the section 'To coordinate your
speaker system for 5.1 channel output' on
this page.
Not Connected
Select if you have not made connections to
an amplifier or receiver or if you have made
stereo connections to a TV or monitor.
Language General
2 Channel
5.1 Channel
Not Connected
Select Exit
SETUP
* Factory setting
To coordinate your speaker system for 5.1
channel output
When [5.1 Channel] is selected in the [Analog Jacks]
screen, the following screens appear to determine the
configuration of your speaker system. In all of the
following screens, select [Present] if the speaker in
question is present in your system, and [Not Present] if
it is not.
[Center Speaker]
Audio1 Audio2 Video Language
Setup Navigator
Amp Connection
Center Speaker
Center speaker is connected
to an amplifier
Move ENTER
[Surround Speakers]
Audio1 Audio2 Video Language
Setup Navigator
Amp Connection
Surround Speaker
Surround speakers are connected
to an amplifier
Move
ENTER
[Sub-woofer]
Audio1 Audio2 Video Language
Setup Navigator
Amp Connection
Sub-woofer
Sub-woofer is connected
to an amplifier
Move
ENTER
Settings: Present*
Not Present
Note
If [Not Present] is selected for both [Center Speaker] and
[Surround Speaker], [Sub-woofer] is automatically set to
[Not Present] and the [Sub-woofer] screen is not displayed.
General
Present
Prese
Not Present
Select SETUP Exit
General
Present
Not Present
Select Exit
SETUP
General
Present
Prese
Not Present
Select Exit
SETUP
* Factory setting
23