3 Change settings
This section helps you change the settings of
this player.
1
2
3
Note
•
You cannot change a menu option that is grayed out.
•
To access [Preferences], stop the disc play.
•
To return to the previous menu, press . To exit the
menu, press
.
General (sleep, standby...)
1
Press .
2
Select [Setup] > [General] to access the
general setup options.
[Disc Lock]: Lock or unlock a disc for
•
play. To play a locked disc, you need
to input your password: press
to enter a digit, and press
change a digit position. The default
password is "136900".
•
[OSD Language]: Select a language for
on-screen menu.
[Sleep Timer]: Set a period of time for
•
this player to switch automatically to
standby mode from play.
•
[Auto Standby]: Enable or disable auto
standby. If enabled, this player switches
automatically to standby after 15
EN
12
Unlock
Disc Lock
General
OSD Language
Auto (ENG)
Sleep Timer
Off
Video
Auto Standby
On
Registration
DivX(R) VOD Code
Audio
Preference
/
to
minutes of inactivity (for example, in
pause or stop mode).
•
[DivX(R) VOD Code]: Display
the DivX
®
deregistration code.
Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
•
[TV System]: Select a TV system that
matches your TV. By default, this setting
matches the common TVs in your
country.
[Aspect ratio]: Select a picture display
•
format to fit the TV screen.
[Progressive]: Turn on or off the
•
progressive scan mode. If a progressive
scan TV is connected to this player,
turn on the progressive scan mode.
•
[Picture Setting]: Select a predefined
color setting, or customize a setting.
Note
•
To achieve progressive scan pictures, make sure that
your TV supports the progressive scan feature, and
your TV is connected to this player through the Y/Pb/
Pr connectors.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
[Analogue Output]: Select an audio
•
format for sound output when this
player is connected through the
AUDIO OUT L/R connectors.
registration code and