Table of Contents
Advertisement
3 Change settings
This section helps you change the settings of
this player.
1
2
3
Note
•
You cannot change a menu option that is grayed out.
•
To access [Preference], stop the disc play.
•
To return to the previous menu, press . To exit the
menu, press
.
General (sleep, standby...)
1
Press .
2
Select [Setup] > [General] to access the
general setup options.
[Disc Lock]: Lock or unlock a disc for play.
•
To play a locked disc, you need to input
your password: press
digit, and press
position. The default password is "136900".
•
[OSD Language]: Select a language for on-
screen menu.
•
[Sleep Timer]: Set a period of time for this
player to switch automatically to standby
mode from play.
[Auto Standby]: Enable or disable auto
•
standby. If enabled, this player switches
automatically to standby after 15 minutes
of inactivity (for example, in pause or stop
mode).
EN
10
Disc
Setup
Disc Lock
Unlock
General
OSD Language
English
Sleep Timer
Off
Video
Auto Standby
On
Audio
Preference
to enter a
/
to change a digit
Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
[TV System]: Select a TV system that
•
matches your TV. By default, this setting
matches the common TVs in your country.
[Aspect ratio]: Select a picture display
•
format to fit the TV screen.
•
[Picture Setting]: Select a predefined color
setting, or customize a setting.
•
[Closed Caption]: Enable this feature
to show the sound effects in subtitles.
Applicable only when both a disc and a TV
support this feature.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
•
[Analogue Output]: Select an audio format
for sound output when this player is
connected through the AUDIO OUT L/R
connectors.
[Digital Audio]: Select an audio format
•
for sound output when this player is
connected through the COAXIAL
connector.
•
[Digital Output] - Select a type of
digital output: [Off] - Disable digital
output; [All] - Support multi-channel
audio formats; [PCM Only] - Downmix
to two-channel audio signal.
[LPCM Output] - Select a LPCM
•
(Linear Pulse Code Modulation)
output sampling rate. The higher the
sampling rate, the better the sound
quality. [LPCM Output] is enabled only
when [PCM Only] is selected under
[Digital Output].
•
[Volume]: Change a volume level.
[Sound Mode]: Select a preset sound effect.
•
Advertisement
Table of Contents
