Customizing The Picture; Using Automatic Picture Settings - Samsung SPN4235 Owner's Instructions Manual

Customizing the Picture

You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color,
and Tint settings of your PDP.
Press the Menu button, then press the joystick to
1
enter.
Move the joystick up or down to select "Adjust",
2
then press the joystick to enter.
You will also see the items "Contrast", "Brightness",
"Sharpness", "Color" and "Tint".
Move the joystick up or down to select the item you
3
wish to change.
Move the joystick left or right to change the value of
4
the item.
Press the Menu button to exit.
5
Note
• In the PC/DVI mode, you can't adjust the Sharpness, Color and Tint.
• The Tint doesn't operate in Component(480p, 720p, 1080i) mode.
40
Picture
Mode Custom
Adjust
Color Tone Custom
Move Select Exit
Picture
Mode Custom
Adjust
Color Tone Normal
Move Enter Exit
Adjust
Contrast 80
Brightness 50
Sharpness 50
Color 50
Tint R 50 G 50
Move Adjust Exit
Contrast 82

Using Automatic Picture Settings

Your PDP has automatic picture settings that allow you to adjust the video display easily.
Press the Menu button, then press the joystick to
1
enter.
!
Quick way to access the picture setting: Just
press the "P.Mode" button on the remote control.
Move the joystick left or right to select "Custom",
2
"Dynamic", "Standard" or "Movie" picture setting.
• You can select "High", "Middle", "Low" or
"Custom" in PC/DVI mode.
Press the Menu button to exit.
3
Picture
Mode Custom
Adjust
Color Tone Custom
Move Select Exit
Picture
Mode Dynamic
Adjust
Color Tone Custom
Move Select Exit
41