Setting up network printing
For Print Server mode with NetWare 4.x bindery emulation
Note
Before using bindery emulation, check that bindery emulation is compatible with the NetWare server.
1
From a client computer, log on with Supervisor permissions to access the NetWare server where the
PServer is registered.
2
Start up Pconsole.
3
From the "Available Options" list, select "Quick Setup", and then click the [Enter] button.
4
Enter the appropriate names in the "Printer Server Name", "Printer Name", "Print Queue Name", and
"Print Queue Volume" fields, select "Other/Unknown" from the "Printer type" field, and then save the
specified settings.
5
Click the [Esc] button to quit Pconsole.
Next, specify the NetWare settings for this machine as described below.
Note
The settings can also be specified from Web Connection.
1
Press the [Utility/Counter] key in this machine's control panel, touch [Administrator Settings], and then
enter the administrator password.
–
The administrator password is required to enter Administrator mode. Ask the administrator of this
machine for the administrator password.
2
Touch [Network Settings], then [NetWare Settings].
3
Touch [IPX Settings], and then specify settings for the following. After specifying the settings, touch
[Close].
–
IPX Setting: Select [ON].
cm6520
3
3-17