Table of Contents
Advertisement
2.2. Mounting the Print Cartridge
Mount the print cartridge as follows:
When installing or replacing the print cartridge, be
ATTENTION
careful not to insert it out of place.
1. Confirm that the scanner is turned off.
2. Grab both ends of the Print Cartridge Cover, pull
and turn it towards you to open the cover.
3. Remove the tape which fixes the Print Cartridge
Holder.
4. Pinch the Arm with your fingers as shown below
and release the Arm.
5. Take out the Print Cartridge from the bag.
6. Remove protection tape on the Print Cartridge.
Do not touch the metal part of the cartridge
ATTENTION
nor put the tape back again.
6 |
Print Cartridge Holder
7. Put the Print Cartridge into the holder as below.
Be careful not to let the Print Cartridge catch
ATTENTION
the print circuit film.
7.
Lower the Arm gently until it locks in and fix the
cartridge in place.
8.
Move the Print Cartridge Holder to an appropriate
printing position.
It should be positioned where the document will pass
through and a printable area on the scanned page will
pass under.
9.
Close the Print Cartridge Cover.
Advertisement
Table of Contents
