Table of Contents
Advertisement
3. Pinch the Arm with your fingers as shown below
and release the Arm.
4. Remove the old Print Cartridge.
5. Remove the protection tape on the new Print
Cartridge.
Do not touch the metal part of the cartridge nor
ATTENTION
put the tape back again.
6. Put the Print Cartridge into the holder with its tab
pointing to the right.
7. Lower the Arm gently until it locks in to fix the
cartridge in place.
8. Move the Print Cartridge Holder to an appropriate
printing position.
It should be positioned where the document will pass
through.
When printing close to document edge, be
ATTENTION
careful about the position so that characters
may not be printed off of the document.
9. Close the Print Cartridge Cover.
10. Turn on the scanner.
11. Reset the Ink Remain Counter.
You must clear the Ink Remain Counter
ATTENTION
whenever you replace the print cartridge.
For Windows 98, Windows Me, Windows 2000, Windows XP
On the [Start] menu, select [Control panel].
Select [Scanners and Cameras].
On fi-4530C icon,
right click and select [Properties] (for Windows Me,
Windows XP),
or double click (for Windows 98, Windows 2000).
Select [Device Set] tab.
Click [Clear] button on [Remaining Ink].
The Ink remain counter is reset to 100%.
fi-453PR Imprinter Operator's Guide | 9
Advertisement
Table of Contents
