Summary of Contents for Fujitsu fi-453PR
- Page 1 P3PC-E697-01EN fi-453PR Imprinter ’ ’...
-
Page 2: Table Of Contents
Contents Introduction..............................1 1. Preparations............................4 1.1. Checking the Package Contents............................4 1.2. Names and Functions of Parts............................4 2. Installation............................... 5 2.1. Installing the Imprinter.................................5 2.2. Mounting the Print Cartridge...............................6 2.3. Operation Test..................................7 3. Basic Operation ............................8 3.1. Setting Printing Position..............................8 3.2. -
Page 3: Introduction
Introduction Thank you for purchasing the fi-453PR Imprinter option for Regulatory Information fi-4530C Color Image Scanner. This guide explains how to install and use the imprinter. This guide also contains important information such as FCC declaration procedures for ink cartridge replacement. Keep this guide... - Page 4 Contact the store where you purchased the scanner from use of this product by the user in high-safety or an authorized FUJITSU Image Scanner service applications, and for any claims or compensation for provider to make repairs to this product.
- Page 5 Center. Pay particular attention to this warning in households where there are small children. Do not take apart or modify the scanner. The inside of the scanner contains high-voltage components. Touching these components might cause fire or electric shock. fi-453PR Imprinter Operator’s Guide | 3...
-
Page 6: Preparations
1. Preparations <Imprinter with Scanner Installed> 1.1. Checking the Package Contents Front Side ADF（Automatic Document Feeder） Cover When you unpack the imprinter package, make sure that ADF Paper Chute all parts are included. Refer to the package contents list included in the imprinter package box. -
Page 7: Installation
Fix Tab Hold the Scanner above the Imprinter rear. Gently place the Connect the power cable to the scanner. Scanner onto the Imprinter base while lowering and pushing it forward until it touches the Imprinter. fi-453PR Imprinter Operator’s Guide | 5... -
Page 8: Mounting The Print Cartridge
7. Put the Print Cartridge into the holder as below. 2.2. Mounting the Print Cartridge Mount the print cartridge as follows: When installing or replacing the print cartridge, be ATTENTION careful not to insert it out of place. 1. Confirm that the scanner is turned off. 2. -
Page 9: Operation Test
5. To stop Offline Print test mode, press button. The paper is fed into the ADF. Test print characters The scanner will be turned off. are printed on the paper starting 5mm from its leading edge. fi-453PR Imprinter Operator’s Guide | 7... -
Page 10: Basic Operation
Open the Print Cartridge Cover. • Strings definition （Max. 40 characters） • Counter Setup （column, add/subtract, step） Move the Print Cartridge Holder to an appropriate For the details, please refer to “FUJITSU TWAIN printing position. 32 Scanner Driver User’s Guide” or “TWAIN Driver Help”... - Page 11 (for Windows 98, Windows 2000). Select [Device Set] tab. 7. Lower the Arm gently until it locks in to fix the Click [Clear] button on [Remaining Ink]. cartridge in place. The Ink remain counter is reset to 100%. fi-453PR Imprinter Operator’s Guide | 9...
-
Page 12: Removing Jammed Documents
For Windows 95, Windows NT 4.0 Open the ADF cover. Right-click the icon in taskbar and select [Option]. ADF Cover Select [Scanner Information］ tab. Click [Remaining Ink Counter Reset] button. Imprinter Cover Remove the jammed documents. Close the scanner ADF cover. ADF Cover The Remaining Ink Counter is reset to 100%. -
Page 13: Daily Care
5. Check that the dirt is wiped off, then close the Imprinter Cover. 6. Reinstall the Print Cartridge. (Refer to “3.3. Replacing the Print Cartridge”.) fi-453PR Imprinter Operator’s Guide | 11... -
Page 14: Cleaning The Rollers
4. Confirm that the dirt or dust is removed from the 4.3. Cleaning the Rollers rollers, then close the Imprinter Cover. When ink or paper dust is stuck on the imprinter feed roller surfaces, documents may not feed smoothly. To prevent feed problems, clean the rollers surface regularly. -
Page 15: Error Messages
(If the problem occurs again, contact the store where you purchased the imprinter or contact an authorized FUJISTU scanner service provider.) For other errors, refer to “fi-4530C Image Scanner ATTENTION Operator’s Guide” included in fi-4530C Setup CD-ROM. fi-453PR Imprinter Operator’s Guide | 13... -
Page 16: Specifications
6. Specifications Item Specification Printing Method Thermal inkjet printing Print Timing Post printing : A to Z, a to z Printing Characters Alphabet Numeric Characters : 0, 1 to9 : ! ” $ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _` { | } ~ Symbols Maximum number of Maximum 40 characters...