Yamaha DTX-PROX Owner's Manual page 63

Symptom
Settings The drum module does
not store its settings
Data cannot be saved on
a USB flash drive
Cannot send data to or
from the smart device
The Bluetooth-equipped
smart device cannot be
paired with nor con-
nected to the instrument.
Power turns off unex-
pectedly
The DTX-PROX does
not receive any switch or
trigger signals at all
I want to reset the DTX-
PROX to the factory
default
Possible cause
The drum module automatically stores its
system settings whenever you turn it off
using the [
• Do not turn off the drum module by
unplugging the AC adaptor. This will
prevent it from storing the system set-
tings.
• User settings for kits, click sets, and trig-
gers must be stored manually.
USB 1.1 compatible flash drives cannot
be used on the DTX-PROX.
• Ensure that the USB flash drive in ques-
tion has been formatted using the DTX-
PROX.
• Ensure that the USB flash drive in ques-
tion has not been write-protected.
• Ensure that there is sufficient free space
on the USB flash drive to save the data.
(For more information, refer to the "Ref-
erence Manual" (PDF).)
Check the connection. For more informa-
tion, refer to the iPhone/iPad Connection
Manual or Smart Device Connection
Manual for Android™.
• Check the Bluetooth function of the
smart device is activated. To connect
the smart device and the instrument via
Bluetooth, both devices need to be func-
tional.
• The smart device and the instrument
need to be paired (page 24).
• In case there is a device (microwave
oven, wireless LAN device, etc.) that
outputs signals in the 2.4 GHz fre-
quency band nearby, move this instru-
ment away from the device that is
emitting radio-frequency signals.
Disable the Auto Power-Off function.
Use the Factory Reset to restore the set-
tings to the factory defaults.
Reference
Troubleshooting
Solution
] (Standby/On) button.
DTX-PROX Owner's Manual
Reference
page
page 18
page 15
page 40
Reference
Manual
(PDF)
page 23
page 24
page 19
page 20
59