General System Overview - GE Simon XT Manual

Simon XT System Manual
be indicated by the corresponding zone lights flashing on a LED keypad or by written messages on the
LCD keypad.

General System Overview

The Simon XT represents the latest in home and business security protection technology providing ADT
customers with:
Burglary, emergency, and fire* protection
At least one touchpad to control operations and display system status
Sensors for perimeter and interior burglary protection
Smoke or combustion detectors* for early fire warning
Display of zones triggered during alarm
Displayed and spoken messages
Multiple partition arming/disarming
System scheduling
Remote control
The Simon XT is designed to be as maintenance free as possible, however we suggest that you still test
your system once a month and after any alarm occurrences.
Treat the system as you would any other electrical equipment; do not slam protected doors or windows,
keep dust from accumulating on the touchpad and sensors, and do not spray water or any liquid on the
units.
*Your system may or may not be set up for fire protection.
Arm & Disarm the System
Arming
Arming Doors and Windows
To arm doors and windows:
1. Ensure all doors and windows are closed.
2. Press [DOORS] + [WINDOWS] + [security code] when the panel displays "enter code".
3. The panel will display "Doors + Windows", the [door] + [window] button will light up, and the system
will speak "Door and windows on".
4. The panel will begin an 'exit delay' and will sound the exit beep until the exit delay expires.
Arming Doors, Windows and Motion Sensors
To arm doors, windows and motion sensors:
https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]