Wired Network Connection; Remote Control - LG 32LV34 Series Owner's Manual

Wired network connection

(Depending on model)
This TV can be connected to a Pro:Centric server via the LAN port.
After making the physical connection, the TV needs to be set up for
network communication.
Connect the LAN port of the Modem or Router from Pro:Centric server
to the LAN port on the TV.
Broadband Modem
Broadband Modem
Pro:Centric Server
Connect the LAN port of the Modem or Router to the LAN port
on the TV.
Connect the LAN port of the PC to the AUX LAN port on the TV.
• Do not connect a modular phone cable to the LAN port.
• Since there various connection methods, please follow
the specifications of your telecommunication carrier or
internet service provider.
8

Remote control

The descriptions in this manual are based on the buttons on the
remote control. Please read this manual carefully and use the
TV correctly. To replace batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the
inside the compartment, and close the battery cover. To remove the
batteries, perform the installation actions in reverse.
Make sure to point the remote control toward the remote control
sensor on the TV.
(Some buttons and services may not be provided depending on
models or regions.)
Router
A
Broadband Modem
screen to reduce energy consumption.
Pro:Centric Server
B
Number buttons Enters numbers.
• In Analogue TV and some countries, some remote
control buttons may not work.
(POWER) Turns the TV on or off.
Selects an AV mode.
Changes the input source.
Selects Radio, TV, and DTV programme.
Accesses the saved channel list.
Tunes to the last channel viewed.
and ends to the label
Adjusts the brightness of the