Antenna Connection; Other Connections; Connections (Notifications) - LG 32LV34 Series Owner's Manual

Hide thumbs Also See for 32LV34 Series:
Table of Contents

Advertisement

Separate purchase (Wall mounting bracket)
Model
32/43LV34**
VESA (A x B)
Standard screw
Number of screws
Wall mount bracket
B
• Remove the stand before installing the TV on a wall
mount by performing the stand attachment in reverse.
• When using the wall mount, it is recommended that you apply a
piece of tape over the Stand holes to prevent dust and bugs from
entering the holes. (Depending on model)
Stand Hole

Connections (notifications)

Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device's
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
• The external device connection may differ from the model.
• Connect external devices to the TV regardless of the order of the
TV port.
• If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.
• Refer to the external equipment's manual for operating
instructions.
49/55LV34**
200 x 200
300 x 300
M6
M6
4
4
LSW240B
LSW350B
MSW240
MSW240
A
• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the Picture
menu until the picture is clear.
• In PC mode, some resolution settings may not work properly
depending on the graphics card.
• When connecting via a wired LAN, it is recommended to use a CAT
7 cable.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
• Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC

Other connections

Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
• Use only with the 3 Pole 3.5 mm Stereo Jack.
• Do not connect your headphones or earphones to the port for
connecting an external speaker.
7

Advertisement

Table of Contents
loading

Table of Contents