Maintenance/Customer Service - Siemens DG30036E Installation And Operating Instructions Manual

Cleaning
■
Clean externally with a mild cleaning agent. Do not use
aggressive or abrasive detergents!

Maintenance/Customer Service

■
Repairs and other maintenance work may only be
carried out by one of our authorized customer service
representatives in order to avoid potential sources of
danger.
■
When you contact customer service, please quote the E
and FD numbers on your appliance (Fig. A).
Rated capacity
Rated voltage
Rated output DGxxx36E:
Rated output DGxxx36R:
Rated output DGxxx36P:
Rated current DGxxx36E
Rated current DGxxx36R
Rated current DGxxx36P
Fuse protection
Protection type / class
Rated over-pressure DGxxx36E:
Rated over-pressure DGxxx36R:
Rated over-pressure DGxxx36P:
Cold and warm water connection
Corrosion prevention
Warm water temperature range
Frost protection
Insulation thickness
Stand-by power consumption at
65 °C
Mixed water quantities at 40 °C
(15 °C/65 °C)
Heating time (inlet 12 °C -> 60 °C)
DGxxx36E
DGxxx36R/DGxxx36P
Weight [filled]
Dimensions (H x D)
GB
■
The first inspection must be carried out no later than 2
years subsequent to initial startup of the appliance. This
involves inspection of the protection anode which may
need to be replaced, and the appliance may need to be
cleaned and descaled. The customer service will suggest
the next inspection date for a service.
■
The power supply and the water supply must be shut off
before all work on the appliance.
■
After service work is complete, proceed as during startup.
See IV. Startup
T e c h n i c a l d a t a
[l] 30
[V]
[W]
[A]
[A]
[Mpa]
[°C]
[°C]
[mm] 30
[kWh/d] 0.65
[l] 54
[min] 68
51
[kg] 49
[cm] 58 x 39
50 80
220–240 (~ 50 Hz)
1500
2000
2000
6.5
8.7
8.7
10
IP24D
0.9
0.9
0.6
G 1/2"
Magnesium protection anode
approx. 35–75
approx. 15
35
0.85 1.05
90 144
114 182
85 137
70 107
65 x 45 90 x 45
100
1.25
180
228
171
131
109 x 45
7