JVC KD-SH909 Instructions Manual page 39

When connecting a DVD player:
: Turns on and off the power.
3:
Starts playback.
¡:
• Fast-forwards the chapter when pressed
and held.
• Skips to the beginning of the next chapter
when pressed briefly.
1:
• Reverses the chapter when pressed and
held.
• Goes back to the beginning of the current
chapter when pressed briefly.
Goes back to the beginning of the
previous chapter when pressed
consecutively.
7:
Stops operations.
Note:
When you press the above buttons, the display shows
"DVD" and its operation mode (such as 3, 7 ).
When connecting a VCR:
: Turns on and off the power.
3:
Starts playback.
¡:
Fast-winds a tape when pressed.
1:
Rewinds a tape when pressed.
7:
Stops operations.
Note:
When you press the above buttons, the display shows
"VCR" and its operation mode (such as 3, 7 ).
For KD-SH707:
You can connect two external components to this
unit.
Connect one to the auxiliary input jack on the
control panel, and the other to the CD changer
jack on the rear.
• To use the external component connected to
the CD changer jack on the rear, set "EXT IN"
to "LINE INPUT" (see page 33).
• To use the external component connected to
the auxiliary input jack on the control panel, set
"AUX IN" to "ON" (see page 34).
1
Select the external component—AUX
INPUT (AUX) or LINE INPUT (LINE).
AUX INPUT (AUX): To select the
LINE INPUT (LINE): To select the
• If "LINE INPUT" cannot be selected, see
page 33 and set "EXT IN" to "LINE INPUT".
This cannot be used together with the CD
changer.
2
Turn on the connected component
and start playing the source.
When you select a
source, the power
automatically comes on.
Each time you press the
button, the source
changes as described on
page 8.
component connected
to the MP3 INPUT jack
on the control panel
component connected
to the LINE IN plug
39