JVC KD-SH909 Instructions Manual page 23

To go to a particular directory directly
IMPORTANT:
To directly select the directories using the
number button(s), it is required that directories
are assigned 2 digit numbers at the beginning of
their directory names. (This can only be done
during the recording of CD-Rs or CD-RWs.)
Ex.: If directory name is "01 ABC"
press 1 to go to Directory "01 ABC."
If directory name is "1 ABC,"
pressing 1 does not work.
If directory name is "12 ABC"
press and hold 6 (12) to go to
Directory "12 ABC."
Press the number button corresponding to the
directory number to start playing the first file in
the selected directory.
• To select a directory number from 01 – 06:
Press 1 (7) – 6 (12) briefly.
• To select a directory number from 07 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
Notes:
• If "MP3" flashes on the display after you have
selected a directory, it means that the directory does
not contain any MP3 files.
• You cannot directly select a directory with a number
greater than 12.
To select a particular file in a directory, press
¢ 4 after selecting the directory.
or
To skip to the next directory—either on the
same hierarchy level or on a different
hierarchy level
On the control panel:
1 Press MODE (M) while playing
an MP3 disc. The unit enters
the functions mode.
2 Press ¢
in the functions mode.
Each time you press the button
consecutively, the next
directory is located (and the
first file in the directory starts
playing, if recorded).
(See "MP3 playback/search
order" on page 19.)
On the remote controller:
Each time you press and hold the
PRESET
button consecutively, the next
directory is located (and the first file
in the directory starts playing, if
recorded).
(See "MP3 playback/search order"
on page 19.)
briefly while still
23