Bissell SPOTBOT 2117 User Manual page 8

Filling Your Clean Water/Formula Tank:
Portable Machine Formula
If you are using a formula with the EasyFill system (yellow cap), please refer to page 7
for other filling instructions.
1
To fill the Clean Water/Formula Tank,
remove the tank by lifting it straight up
and then away from the unit.
3
1) Add hot tap water to water fill line.
2) Add formula by following the indicated
"formula" fill line on your tank
A few notes about filling the Clean
Water/Formula Tank:
• The tank has three support points (the nozzle and
two corners of the tank) when placed on a flat
surface, the tank will rest securely.
• Fill with formula to the Other Formula fill line as
indicated on the right side of the tank.
• Fill with hot (140°F/60°C MAX) tap water and add
the appropriate BISSELL® formula.
DO NOT USE BOILING WATER. DO NOT HEAT
WATER OR TANK IN MICROWAVE.
Pour in more power with BISSELL Boosts
8
www.BISSELL.com
1 2
• Fill tank with water and 2X formula (Step 3 above).
• Add 1 ounce of any BISSELL Boost.
2
Unscrew the yellow cap at the top of the
tank.
4
Twist the cap back into place and set
tank back on unit.