Bissell REVOLUTION PET PRO Quick Start User Manual page 10

Cleaning with Hose & Tool
1
Lift the accessory
hose door on top
of foot on the front
of the machine. The
door flips toward the
machine to open.
2
Insert the hose and
snap into place.
Be sure the red-
colored hose
release clip is
facing out, away
from machine.
3
Attach the tool to the end of the hose.
(Tools may vary by model.) Press the
Power Button to turn machine ON.
NOTE: If using the Deep Reach Tool or Pet Stain Tool be sure the needles of the
tool are pressed down into the carpet so the spray gets into the carpet fibers.
Cleaning with CleanShot®
1
Press the CleanShot
button with your
foot. The window of
the button will be
green and show an "I"
symbol when it is on.
10
www.BISSELL.com
— Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts. Brush
Roll continues to rotate when in the upright position.
— Brush Roll continues to turn while product
is turned ON and handle is in upright position.
To avoid damage to carpet, rugs, furniture, and
flooring, avoid tipping cleaner or setting it on
furniture, fringed area rugs, or carpeted stairs during
tool use.
— The Brush Roll remains on while cleaning with
the hose and tool. Do not allow cleaner to sit in one
location for an extended period of time, as damage
to floor can result.
4
Press the spray trigger button to spray
the soiled area, then slowly move tool back
and forth over the area.
Release the trigger to suck up the dirty
solution. Work in small sections until the area
is clean.
When finished cleaning, turn the machine ON
to suction up warm clean water to rinse the
inside of the hose and tool. Detach the hose
and tool and close the accessory hose door.
Let the hose and tool air dry before storing.
2
Spray will continue until you
turn it off. To turn CleanShot
off, press the button with
your foot. The window of the
button will be red and show
an "O" symbol when it is off.
Completely cover the
stain with CleanShot
spray. Allow the stain
to soak. To extract,
maneuver the foot
of the machine over
the stain to scrub and
remove. Continue to
clean over the area
multiple times for extra
scrubbing and suction.