Gigaset S700H PRO Manual page 51

Switching the alert tone (beep) on/off
Switch on an alert tone (beep) instead of the ringtone:
Use the Profile key to select
following is shown in the status bar:
Switching off the alert tone:
Switching the silent alert on/off
Incoming calls and other messages are indicated by a silent alert.
. . . use
Alert Change (
Switching advisory tones on/off
The handset notifies acoustically about different activities and statuses. These advisory tones
can be switched on/off independently of each other.
. . . use
Tones OK . . . then
Tone when keys are pressed:
Confirmation/error tone after making entries, advisory tone when a new message has been
received:
Warning tone when there are fewer than 10 minutes of talktime remaining
(every 60 seconds):
Warning tone when the handset is moved out of range of the base station:
Save settings:
Auto answer
When Auto answer is enabled, the handset accepts an incoming call as soon as it is removed
from the charging cradle.
. . . use
Change ( = activated)
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold the handsfree key
2 seconds while placing the handset in the charging cradle.
Profile Silent
Use the Profile
to select Settings
= on)
to select Settings
Key Tones: . . . use
Confirmation
Battery
Out of Range: . . . use
Save
to select Settings
Press Beep within 3 seconds . . . The
key to change profile
OK Audio Settings
OK Audio Settings
to select On or Off
. . . use to select On or Off
. . . use to select On or Off
to select On or Off
OK Telephony
Handset
OK Silent
OK Advisory
OK Auto Answer
for a further
51