Gigaset S700H PRO Manual page 49

In idle status
Handset Volume
Speaker / Corded headset)
or
. . . Use
Volume OK Use
Corded headset)
Automatic volume control
Crescendo is not set for the ringtone volume (
The phone is able to automatically adjust the volume of the receiver and ringtone to the
ambient volume. Here you can set the sensitivity with which the phone reacts to changes in
noise level (Very High, High, Medium, Low, Very Low).
. . . Use
Volume OK
Enable/disable:
Adjust the sensor:
Save:
Headset – volume correction
Change the call volume for the wired headset. In addition to the standard settings for the call
volumes, here you can compensate the audio setting characteristics of your headset.
. . . Use
Hdst Boost Use
Microphone sensitivity
Adjust the sensitivity of the microphone for the receiver or wired headset. This gives you
improved acoustics in loud environments and when there are echoes.
. . . Use
Sensitivity OK
headset) Use
Use to select what the setting is to apply for (Earpiece /
Use to select the volume
to select Settings
to select what the setting is to apply for (Earpiece / Speaker /
Use to set the volume
to select Settings
Earpiece Volume / Ringtone Volume
Activation: Use
Sensitivity
Save
to select Settings
to set the volume
to select Settings
Use to select what the setting applies for (Earpiece / Corded
to adjust the sensitivity
Save . . . The setting is saved
OK Audio Settings
Save
p. 50).
OK Audio Settings
Edit
to select On or Off
Use to adjust the sensor sensitivity
OK Audio Settings
Save
OK Audio Settings
Save
Handset
OK Handset
OK Smart
OK Corded
OK Mic
49