Table of Contents

Advertisement

Contents
Contents
Contents
Contents

• User Safety

User Safety
User Safety
User Safety
• Battery Safety
Battery Safety
Battery Safety
Battery Safety
• Setup
Setup
Setup
Setup
• Operation
Operation
Operation
Operation
• Warranty
Warranty
Warranty
Warranty
Contents
• Error Codes
Error Codes
Error Codes
Error Codes
• Specifi cations
Specifications
Specifications
Specifications
User Safety
Retain all sections of this manual for future reference.
Retain all sections of this manual for future reference.
Retain all sections of this manual for future reference.
Battery Safety
Retain all sections of this manual for future reference.
Setup
User Safety
User Safety
User Safety
User Safety
Operation
Warranty
WARNING:
WARNING:
Error Codes
WARNING:
WARNING:
Carefully read the Safety Instructions and
Carefully read the Safety Instructions and
Specifications
Carefully read the Safety Instructions and
Carefully read the Safety Instructions and
Product Manual before using this product. The
Product Manual before using this product. The
Product Manual before using this product. The
Product Manual before using this product. The
Retain all sections of this manual for future reference.
person responsible for the product must ensure
person responsible for the product must ensure
person responsible for the product must ensure
person responsible for the product must ensure
that all users understand and adhere to these
that all users understand and adhere to these
User Safety
that all users understand and adhere to these
that all users understand and adhere to these
instructions.
instructions.
instructions.
instructions.
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
The following label information is placed on
The following label information is placed on your
The following label information is placed on your
Carefully read the Safety Instructions and
The following label information is placed on your
your laser tool to inform you of the laser class
laser tool to inform you of the laser class for your
laser tool to inform you of the laser class for your
Product Manual before using this product. The
laser tool to inform you of the laser class for your
for your convenience and safety.
convenience and safety.
convenience and safety.
person responsible for the product must ensure
convenience and safety.
that all users understand and adhere to these
instructions.
Contents
WARNING:
User Safety
The following label information is placed on your
Battery Safety
laser tool to inform you of the laser class for your
Setup
convenience and safety.
Operation
Warranty
Error Codes
The DW030PL-XJ tool emits a visible laser beam, as
Specifications
The DW030PL-XJ tool emits a visible laser beam, as
The DW030PL-XJ tool emits a visible laser beam, as
The DW030PL-XJ tool emits a visible laser beam, as
shown in Figure
#1. The laser beam emitted is Laser
A
shown in Figure
#1. The laser beam emitted is Laser
shown in Figure
#1. The laser beam emitted is Laser
A
A
Retain all sections of this manual for future reference.
shown in Figure
#1. The laser beam emitted is Laser
A
Class 2 per IEC 60825-1 and complies with 21 CFR
Class 2 per IEC 60825-1 and complies with 21 CFR
Class 2 per IEC 60825-1 and complies with 21 CFR
Class 2 per IEC 60825-1 and complies with 21 CFR
User Safety
1040.10 and 1040.11 except for deviations pursuant to
1040.10 and 1040.11 except for deviations pursuant to
1040.10 and 1040.11 except for deviations pursuant to
1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
Laser Notice No. 50, dated June 24, 2007.
Laser Notice No. 50, dated June 24, 2007.
Laser Notice No. 50, dated June 24, 2007.
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
While the laser tool is in operation, be careful
While the laser tool is in operation, be careful not
Carefully read the Safety Instructions and
While the laser tool is in operation, be careful not
The DW030PL-XJ tool emits a visible laser beam, as
While the laser tool is in operation, be careful not
not to expose your eyes to the emitting laser
to expose your eyes to the emitting laser beam
to expose your eyes to the emitting laser beam
Product Manual before using this product. The
shown in Figure
to expose your eyes to the emitting laser beam
#1. The laser beam emitted is Laser
A
beam (red light source). Exposure to a laser
(red light source). Exposure to a laser beam
person responsible for the product must ensure
(red light source). Exposure to a laser beam
Class 2 per IEC 60825-1 and complies with 21 CFR
(red light source). Exposure to a laser beam
beam for an extended time period may be
for an extended time period may be hazardous
for an extended time period may be hazardous
that all users understand and adhere to these
1040.10 and 1040.11 except for deviations pursuant to
for an extended time period may be hazardous
hazardous to your eyes. Do not look into the
to your eyes. Do not look into the beam with
to your eyes. Do not look into the beam with
instructions.
Laser Notice No. 50, dated June 24, 2007.
to your eyes. Do not look into the beam with
beam with optical aids.
optical aids.
optical aids.
optical aids.
WARNING:
WARNING:
WARNING:
WARNING: To reduce the risk of injury, the user
WARNING: To reduce the risk of injury, the user
The following label information is placed on your
While the laser tool is in operation, be careful not
WARNING: To reduce the risk of injury, the user
To reduce the risk of injury, the user must
must read the product User Manual and the
must read the product User Manual and the
laser tool to inform you of the laser class for your
must read the product User Manual and the
to expose your eyes to the emitting laser beam
read the product User Manual and the Safety
Safety Manual.
Safety Manual.
convenience and safety.
(red light source). Exposure to a laser beam
Safety Manual.
Manual.
for an extended time period may be hazardous
to your eyes. Do not look into the beam with
optical aids.
Setup
Setup
Setup
Setup
Attaching the Wrist Strap
Attaching the Wrist Strap
Attaching the Wrist Strap
Attaching the Wrist Strap
1.
While facing the front of the tool, insert the thin end
1.
1.
While facing the front of the tool, insert the thin end of
While facing the front of the tool, insert the thin end of
1.
While facing the front of the tool, insert the thin end of
of the wrist strap through one of the holes in the
the wrist strap through one of the holes in the lower
the wrist strap through one of the holes in the lower
the wrist strap through one of the holes in the lower
lower right corner of the tool.
right corner of the tool.
right corner of the tool.
right corner of the tool.
2.
Setup
Push the thin end of the wrist strap until it goes
2.
2.
Push the thin end of the wrist strap until it goes
Push the thin end of the wrist strap until it goes
through the other hole.
2.
Push the thin end of the wrist strap until it goes
through the other hole.
through the other hole.
through the other hole.
Attaching the Wrist Strap
3.
Separate the two wires, which make up the thin end
3.
3.
Separate the two wires, which make up the thin end
Separate the two wires, which make up the thin end
of the wrist strap, to form a loop.
3.
Separate the two wires, which make up the thin end
1.
While facing the front of the tool, insert the thin end of
of the wrist strap, to form a loop.
of the wrist strap, to form a loop.
of the wrist strap, to form a loop.
4.
Insert the thick end of the wrist strap all the way
the wrist strap through one of the holes in the lower
4.
4.
Insert the thick end of the wrist strap all the way
through the loop in the thin end, so the wrist strap is
Insert the thick end of the wrist strap all the way
right corner of the tool.
4.
Insert the thick end of the wrist strap all the way
through the loop in the thin end, so the wrist strap is
through the loop in the thin end, so the wrist strap is
securely fastened to the tool (Figure
through the loop in the thin end, so the wrist strap is
2.
Push the thin end of the wrist strap until it goes
securely fastened to the tool (Figure
securely fastened to the tool (Figure
securely fastened to the tool (Figure
Charging the Battery
through the other hole.
Charging the Battery
Charging the Battery
Charging the Battery
3.
Separate the two wires, which make up the thin end
Fully charge the battery before initial use and whenever
of the wrist strap, to form a loop.
the tool has not been used for 6 months or longer.
Fully charge the battery before initial use and whenever
Fully charge the battery before initial use and whenever
Fully charge the battery before initial use and whenever
the tool has not been used for 6 months or longer.
the tool has not been used for 6 months or longer.
1.
Locate the port cover on the side of the tool (Figure
the tool has not been used for 6 months or longer.
4.
Insert the thick end of the wrist strap all the way
A
through the loop in the thin end, so the wrist strap is
#4).
1.
1.
Locate the port cover on the side of the tool (Figure
Locate the port cover on the side of the tool (Figure
1.
Locate the port cover on the side of the tool (Figure
securely fastened to the tool (Figure
#4).
#4).
2.
A
Using your fi nger, gently pull the port cover down
A
#4).
A
(Figure
#1).
E
Charging the Battery
2.
2.
Using your finger, gently pull the port cover down
Using your finger, gently pull the port cover down
2.
Using your finger, gently pull the port cover down
3.
(Figure
#1).
(Figure
Insert the small end of the USB Recharge Cable into
#1).
E
E
(Figure
#1).
E
Fully charge the battery before initial use and whenever
the port on the side of the tool, making sure to insert
3.
3.
Insert the small end of the USB Recharge Cable into
Insert the small end of the USB Recharge Cable into
the tool has not been used for 6 months or longer.
Setup
3.
Insert the small end of the USB Recharge Cable into
the fl at side of the cable into the fl at side of the port
the port on the side of the tool, making sure to insert
the port on the side of the tool, making sure to insert
the port on the side of the tool, making sure to insert
(Figure
#2).
E
1.
Locate the port cover on the side of the tool (Figure
the flat side of the cable into the flat side of the port
the flat side of the cable into the flat side of the port
Attaching the Wrist Strap
the flat side of the cable into the flat side of the port
#4).
4.
Insert the USB end of the cable into a USB port in a
A
(Figure
(Figure
#2).
#2).
E
E
(Figure
#2).
E
computer or USB power outlet (Figure
1.
While facing the front of the tool, insert the thin end of
2.
Using your finger, gently pull the port cover down
4.
4.
Insert the USB end of the cable into a USB port in
Insert the USB end of the cable into a USB port in
4.
Insert the USB end of the cable into a USB port in
the wrist strap through one of the holes in the lower
5.
Wait approximately 2.5 hours for the battery to fully
(Figure
#1).
E
a computer or USB power outlet (Figure
a computer or USB power outlet (Figure
a computer or USB power outlet (Figure
right corner of the tool.
charge and then disconnect the USB Recharge
3.
Insert the small end of the USB Recharge Cable into
5.
5.
Wait approximately 2.5 hours for the battery to fully
Wait approximately 2.5 hours for the battery to fully
Cable.
5.
2.
Wait approximately 2.5 hours for the battery to fully
Push the thin end of the wrist strap until it goes
the port on the side of the tool, making sure to insert
charge and then disconnect the USB Recharge
charge and then disconnect the USB Recharge
charge and then disconnect the USB Recharge
When the tool is ON, the battery level appears in the
through the other hole.
the flat side of the cable into the flat side of the port
Cable.
Cable.
Cable.
display window (Figure
D
(Figure
#2).
E
3.
Separate the two wires, which make up the thin end
of the wrist strap, to form a loop.
4.
Insert the USB end of the cable into a USB port in
a computer or USB power outlet (Figure
4.
Insert the thick end of the wrist strap all the way
through the loop in the thin end, so the wrist strap is
5.
Wait approximately 2.5 hours for the battery to fully
securely fastened to the tool (Figure
charge and then disconnect the USB Recharge
Cable.
Charging the Battery
Fully charge the battery before initial use and whenever
the tool has not been used for 6 months or longer.
1.
Locate the port cover on the side of the tool (Figure
#4).
A
2.
Using your finger, gently pull the port cover down
(Figure
#1).
E
3.
Insert the small end of the USB Recharge Cable into
the port on the side of the tool, making sure to insert
).
B
).
).
B
B
).
B
).
B
#3).
E
#3).
#3).
E
E
#3).
E
#1).
#3).
E
).
B
E
E
GB
GB
GB
GB
GB
5 5
3
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents