Honda CB250 TWISTER Owner's Manual page 119

CB250 TWISTER
Inspecting Tread Depth
Inspect the tread wear indicators. If they become
visible, replace the tyres immediately.
For safe riding, you should replace the tyres when the
minimum tread depth is reached.
1
1. Wear indicator location mark
W
!
ARNING
Riding on tyres that are excessively worn or
improperly inflated can cause a crash in which
you can be seriously hurt or killed.
Follow all instructions in this owner's manual
regarding tyre inflation and maintenance.
Have your tyres replaced by your dealer.
For recommended tyres, air pressure and minimum
tread depth, see Specifications, refer to page 74.
Follow these guidelines whenever you replace tyres.
Use the recommended tyres or equivalents of the
same size, construction, speed rating, and load
range.
Have the wheel balanced with Honda Genuine
balance weights or equivalent after the tyre is
installed.
Do not install a tube inside a tubeless tyre on this
motorcycle. Excessive heat build-up can cause the
tube to burst.
Use only tubeless tyres on this motorcycle. The rims
are designed for tubeless tyres, and during hard
acceleration or braking, a tube-type tyre could slip
on the rim and cause the tyre to rapidly deflate.
W
!
ARNING
Installing improper tyres on your motorcycle can
adversely affect handling and stability, and can
cause a crash in which you can be seriously hurt
or killed.
Always use the size and type of tyres recommended
in this owner's manual.
33