Table of Contents
Advertisement
358TS
4.
Tighten nuts with the bar nose
held up.
5.
Pull the chain around the bar by
hand. Loosen the adjustment if
you feel tight spots.
Tighten guide bar nuts to 20-23 N•m (200 to 230 kgf•cm,
175-200 lbf•in.). DO NOT over-tighten nuts. Damage to saw may
result.
6.
Assemble components in reverse order.
7.
Keep chain properly tensioned at all times.
Note: All chains require frequent adjustments.
OPERATION
Fuel
Diesel fuels and alternative fuels, such as E15 (15% ethanol),
E85 (85% ethanol) or any fuels not meeting Shindaiwa
requirements are NOT approved for use in Shindaiwa 2-stroke
or Hybrid 4-stroke gasoline engines. Use of diesel or alternative
fuels may cause performance problems, loss of power,
overheating, fuel vapor lock, and unintended machine
operation, including, but not limited to, improper clutch
engagement. Diesel or alternative fuels may also cause
premature deterioration of fuel lines, gaskets, carburetors and
other engine components.
X7503325400
© 01/2021 ECHO Incorporated
OPERATION
25
Advertisement
Table of Contents
